Performance Riding Experience Forum

Please login or register.

Login with username, password and session length
Advanced search  


Author Topic: 2006 R1 race bike  (Read 1186 times)

0 Members and 1 Guest are viewing this topic.


  • Full Member
  • ***
  • Offline Offline
  • Posts: 201
2006 R1 race bike
« on: June 02, 2018, 09:04:10 PM »

I've been too lazy to part this out (and I'd really rather not, as it is superb to ride as is)

2006 AMA R1 (former owner verified chassis/engine was Hacking's)
Frame #37, so there is no way to street it as is. You could swap it over to another frame and have a killer street bike.
With~$13k worth of goodies on it in addition to the bike itself!

Finally got the good bodywork on after testing at Patriot, North, and Grand. This thing handles like a 600 and pulls like a freight train.

The details:

The engine has a full build and was refreshed at the end of 2013, it has a few races and a handful of track days on it. It has custom cams.

Front forks-WSS kit. One side low, one side high speed. 975 fork springs. 1309 Ohlins oil went in, 19 CST, close to R7 wt. (about 5 miles on refresh by Thermosman)

Rear Shock- YA743. Cylinder off of 343 or similar w/titanium spring is fine. (under 100 miles on refresh by Thermosman)

Graves Titanium Full system w/two spare imperfect cans/plumbing

Bazzaz Z-Fi-TC (total system)

STM slipper clutch with yec clutch plates/steels

And much, much more...
Last year of 20 valve engine
Woodcraft frame sliders
Vortex rearsets
Set up for STD shift, but you can convert to GP shift
Graves left engine cover
Graves right engine cover
Spare stock clutch guide cover
LighTech clutch slider
Graves clipons
Ohlins steering damper and mount
Graves velocity stacks
Graves block off plates
Vesrah pads
MB Motorsports secondary superbike radiator
Chain adjusters Arashi HH-05 HH-06 (not installed)
Graves rear shock shim
Galfer DF 475FLW floating wave front rotors
OEM spare front rotors
Lightened rear rotor
R&G Racing radiator guard
Stainless brake lines, front and rear
Brembo master 19x20
New levers
520 kit 15 front, 45 rear w/spare 41 rear
Spare tank w/pump
YEC ecu with Graves 4.4 map (pump gas)
Attack Racing 4mm eccentric triple tree
Geartronics gear indicator
Carbon fiber front fender
GYTR air filter
Smog blocks
Swingarm spools
One spare keyless fuel cap on spare blue (needs paint) tank
Fresh Mobil 1 oil and filter with under 100 miles on it
Fresh brake bleed with under 100 miles on it
Spare ugly bodywork

If you want a beast of a bike with tons of goodies and without breaking the bank, this may be for you. Being a race bike in the AMA and after, it has been crashed a few times. It is mechanically great. If you're looking to win the track bike fashion contest, this isn't the bike for you.

$5800 w/some spares including the spare exhaust system, rear wheel, $5k for the bike alone,  in Charlotte, NC
Brad in Charlotte, NC
'03 R6 track bikes, CB-1 and VFR800 street bikes


  • Full Member
  • ***
  • Offline Offline
  • Posts: 201
Re: 2006 R1 race bike
« Reply #1 on: February 24, 2019, 10:42:32 AM »

Bike is sold. Thanks Mike. Enjoy!

Titanium exhaust still available. $800/bro
Brad in Charlotte, NC
'03 R6 track bikes, CB-1 and VFR800 street bikes

Page created in 0.114 seconds with 36 queries.